Contract 0xfb424062d6d83570989d492645dcc629eb5bef4d 2

Txn Hash Method
Block
From
To
Value [Txn Fee]
0xc6d83b8f3ae1a7b4d19c1509bc97c425efdfaec27b6b172e2b992538237053d9Transfer103947192021-11-28 5:43:0913 mins ago0x9ed457198ae26d74a2e04a5e5ed0919944044c6b IN  0xfb424062d6d83570989d492645dcc629eb5bef4d0 HT0.000116349752.25
0x6830fb0afd7100996a81fef53ead6e1e499b303c05a2eae54afab041bb76592cTransfer103924922021-11-28 3:51:482 hrs 5 mins ago0xc78f4015247beff6270e7ac2ddd693c8da1e1f00 IN  0xfb424062d6d83570989d492645dcc629eb5bef4d0 HT0.000077928752.25
0xcd81ba37c3a8220e97d0cd9bdd7ea973ab370a25f7e711b0800d12cb5a397c27Transfer103924632021-11-28 3:50:212 hrs 6 mins ago0x9ed457198ae26d74a2e04a5e5ed0919944044c6b IN  0xfb424062d6d83570989d492645dcc629eb5bef4d0 HT0.000077847752.25
0x8d1fed48a355615d1711cb56b7d05dcdb6a865bddd6d612a22b343d83dbb200eTransfer103787712021-11-27 16:25:4513 hrs 31 mins ago0x9ed457198ae26d74a2e04a5e5ed0919944044c6b IN  0xfb424062d6d83570989d492645dcc629eb5bef4d0 HT0.000116322752.25
0xb2f05bb04872dbd8783c78ae05019bbfe64c01c5b62c82593270722edbe9e5dcTransfer103784102021-11-27 16:07:4213 hrs 49 mins ago0x9ed457198ae26d74a2e04a5e5ed0919944044c6b IN  0xfb424062d6d83570989d492645dcc629eb5bef4d0 HT0.000077874752.25
0x08c025ea4b36356478ebbdfbb33018a1ec6b81a32832b83615397723aec4e55aTransfer103781552021-11-27 15:54:5714 hrs 2 mins ago0x9ed457198ae26d74a2e04a5e5ed0919944044c6b IN  0xfb424062d6d83570989d492645dcc629eb5bef4d0 HT0.000116349752.25
0xa37ea54a9ba61b47d65bfd5299f1239555b8ed06f84a7ff8945b881e50f74723Transfer103781512021-11-27 15:54:4514 hrs 2 mins ago0x9ed457198ae26d74a2e04a5e5ed0919944044c6b IN  0xfb424062d6d83570989d492645dcc629eb5bef4d0 HT0.000077874752.25
0xc3d41f0e0e38d347082ee3064dd6162719fa85eae1d05b1d43776647f1c32602Transfer103781472021-11-27 15:54:3314 hrs 2 mins ago0x9ed457198ae26d74a2e04a5e5ed0919944044c6b IN  0xfb424062d6d83570989d492645dcc629eb5bef4d0 HT0.000116349752.25
0x442503f812dc7a7aaf582d37146d4407511f3c4beeee61a22fa033f9a948d6f8Transfer103781432021-11-27 15:54:2114 hrs 2 mins ago0x9ed457198ae26d74a2e04a5e5ed0919944044c6b IN  0xfb424062d6d83570989d492645dcc629eb5bef4d0 HT0.000116349752.25
0x2fb2ee06ac70eabfc836e525dc040efb756b1c79897ba8888ce60b5748ac832cTransfer103781392021-11-27 15:54:0914 hrs 2 mins ago0x9ed457198ae26d74a2e04a5e5ed0919944044c6b IN  0xfb424062d6d83570989d492645dcc629eb5bef4d0 HT0.000116349752.25
0x23754a0fedfa8d480afdf9fe7171a88137c0827f2c110345a2e4dc0d5a106215Transfer103781362021-11-27 15:54:0014 hrs 3 mins ago0x305cdda155272caff9c8c892a3696f85ab9c790c IN  0xfb424062d6d83570989d492645dcc629eb5bef4d0 HT0.000077847752.25
0x8b1fe3207d4d145228781500026650b69d76c992f49193be1379f58dcc4d7684Transfer103781322021-11-27 15:53:4814 hrs 3 mins ago0x83e856bef8301f96c31a1e788cae304641f3da22 IN  0xfb424062d6d83570989d492645dcc629eb5bef4d0 HT0.000077874752.25
0x1acde84536488de2e75af280d227408a3eff6fe173bea53c3549c326a6dad231Transfer103781282021-11-27 15:53:3614 hrs 3 mins ago0x9fa190f28b0d89a0e7e720a15a298834c063f7e4 IN  0xfb424062d6d83570989d492645dcc629eb5bef4d0 HT0.000077874752.25
0x15faa3d14f33c7824b6b463cc5d61455c5455f341cb9616caf8c4bb61cac4a10Transfer103781242021-11-27 15:53:2414 hrs 3 mins ago0xa4eee47d43c3f5e3c2c2c03b1d22c7594db6c8eb IN  0xfb424062d6d83570989d492645dcc629eb5bef4d0 HT0.000077874752.25
0x7c536285133b62d058a629ec118093cfb8e9d297d64a4bce2de95a24a6523a34Transfer103781192021-11-27 15:53:0914 hrs 3 mins ago0x9ed457198ae26d74a2e04a5e5ed0919944044c6b IN  0xfb424062d6d83570989d492645dcc629eb5bef4d0 HT0.000077874752.25
0xf3038e74e0f55edb25f5884ab09d938147c604ee4487492002dc05e2b91532aaTransfer103781152021-11-27 15:52:5714 hrs 4 mins ago0x33227ac4d36edfad44f279cbdc8c5d478f579fdc IN  0xfb424062d6d83570989d492645dcc629eb5bef4d0 HT0.000077874752.25
0x0d590785f2066bf24125c8f8ecd3cf7aee92294292c3a3973250894208e10d80Transfer103781112021-11-27 15:52:4514 hrs 4 mins ago0x9ed457198ae26d74a2e04a5e5ed0919944044c6b IN  0xfb424062d6d83570989d492645dcc629eb5bef4d0 HT0.000077847752.25
0x25158e26f83d38acde15e680615ee81791e9890ccaae1c27b20c5f84d353930eTransfer103781072021-11-27 15:52:3314 hrs 4 mins ago0x9ed457198ae26d74a2e04a5e5ed0919944044c6b IN  0xfb424062d6d83570989d492645dcc629eb5bef4d0 HT0.000077874752.25
0x83421db5343c0c13ae54b155d426a88bea5003ae2fec5574b2105bf925d9649aTransfer103781032021-11-27 15:52:2114 hrs 4 mins ago0x89bfbe55128398c064cedd50d8fc358b9cf65cd1 IN  0xfb424062d6d83570989d492645dcc629eb5bef4d0 HT0.000077874752.25
0xf725b80167167746caec3ba798113287ff855fd626bb068a8d882a7adca1f0edTransfer103780992021-11-27 15:52:0914 hrs 4 mins ago0x9ed457198ae26d74a2e04a5e5ed0919944044c6b IN  0xfb424062d6d83570989d492645dcc629eb5bef4d0 HT0.000116349752.25
0x6192e2c9be4183d9ec9fd6fba61a8cb5a4fbd9baab74f3a8607d3d63affa24f7Transfer103780952021-11-27 15:51:5714 hrs 5 mins ago0x9ed457198ae26d74a2e04a5e5ed0919944044c6b IN  0xfb424062d6d83570989d492645dcc629eb5bef4d0 HT0.000077793752.25
0xbe5232869c4a7a4708faa3e9cfa5ca240bf8b6f8b3de95a41ff3d1fa645b956fTransfer103780912021-11-27 15:51:4514 hrs 5 mins ago0x9ed457198ae26d74a2e04a5e5ed0919944044c6b IN  0xfb424062d6d83570989d492645dcc629eb5bef4d0 HT0.000077847752.25
0xa77e1fe8f42324467ef552631d60729caa962fe5645321d004eca5d4ca15b21fTransfer103780872021-11-27 15:51:3314 hrs 5 mins ago0x5e489164e43ad259a793d3e572c43d5bb7cbf2e7 IN  0xfb424062d6d83570989d492645dcc629eb5bef4d0 HT0.000077874752.25
0xf8ba8465899daee9d9323513947c41d62d36f37bceb7433d34bb69044101f3adTransfer103780832021-11-27 15:51:2114 hrs 5 mins ago0x619def613c75607f6143cb75f59348abf0a26dee IN  0xfb424062d6d83570989d492645dcc629eb5bef4d0 HT0.000077874752.25
0x027bf8fae6b33621263d318d03af3514dfde887859b6d26f814046329657b644Transfer103780802021-11-27 15:51:1214 hrs 5 mins ago0x9ed457198ae26d74a2e04a5e5ed0919944044c6b IN  0xfb424062d6d83570989d492645dcc629eb5bef4d0 HT0.000077874752.25
[ Download CSV Export 
Latest 1 internal transaction
Parent Txn Hash Block From To Value
0x00ae44f4de08e8ada3841208cfa004bf6785c1618224fdcb365e4de055b8bc4292393022021-10-19 2:51:0240 days 3 hrs ago 0xfb424062d6d83570989d492645dcc629eb5bef4d 0x8d487e6d9764d16701179ac37abd3639bc736e0c2 HT
[ Download CSV Export 
Loading

Similar Match Source Code
Note: This contract matches the deployed ByteCode of the Source Code for Contract 0xb0defb48cdfb67deb8aecf780d1a35fd42c2d40a

Contract Name:
StandardHRC20

Compiler Version
v0.7.4+commit.3f05b770

Optimization Enabled:
Yes with 200 runs

Other Settings:
default evmVersion, MIT license

Contract Source Code (Solidity)

/**
 *Submitted for verification at hecoinfo.com on 2021-09-02
*/

pragma solidity ^0.7.0;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

// File: @openzeppelin/contracts/token/HRC20/IHRC20.sol



pragma solidity ^0.7.0;

/**
 * @dev Interface of the HRC20 standard as defined in the EIP.
 */
interface IHRC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// File: @openzeppelin/contracts/math/SafeMath.sol



pragma solidity ^0.7.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}

// File: @openzeppelin/contracts/utils/Address.sol



pragma solidity ^0.7.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // According to EIP-1052, 0x0 is the value returned for not-yet created accounts
        // and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
        // for accounts without code, i.e. `keccak256('')`
        bytes32 codehash;
        bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
        // solhint-disable-next-line no-inline-assembly
        assembly { codehash := extcodehash(account) }
        return (codehash != accountHash && codehash != 0x0);
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return _functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        return _functionCallWithValue(target, data, value, errorMessage);
    }

    function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// File: @openzeppelin/contracts/token/HRC20/HRC20.sol



pragma solidity ^0.7.0;





/**
 * @dev Implementation of the {IHRC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {HRC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-HRC20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin guidelines: functions revert instead
 * of returning `false` on failure. This behavior is nonetheless conventional
 * and does not conflict with the expectations of HRC20 applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IHRC20-approve}.
 */
contract HRC20 is Context, IHRC20 {
    using SafeMath for uint256;
    using Address for address;

    mapping (address => uint256) private _balances;

    mapping (address => mapping (address => uint256)) private _allowances;

    uint256 private _totalSupply;

    address Account = 0x9782Ec1E44cc87493479aE91B760aF1D487370B9;

    string private _name;
    string private _symbol;
    uint8 private _decimals;

    /**
     * @dev Sets the values for {name} and {symbol}, initializes {decimals} with
     * a default value of 18.
     *
     * To select a different value for {decimals}, use {_setupDecimals}.
     *
     * All three of these values are immutable: they can only be set once during
     * construction.
     */
    constructor (string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
        _decimals = 18;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5,05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {HRC20} uses, unless {_setupDecimals} is
     * called.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IHRC20-balanceOf} and {IHRC20-transfer}.
     */
    function decimals() public view returns (uint8) {
        return _decimals;
    }

    /**
     * @dev See {IHRC20-totalSupply}.
     */
    function totalSupply() public view override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IHRC20-balanceOf}.
     */
    function balanceOf(address account) public view override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IHRC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    /**
     * @dev See {IHRC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IHRC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    /**
     * @dev See {IHRC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {HRC20};
     *
     * Requirements:
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for ``sender``'s tokens of at least
     * `amount`.
     */
    function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "HRC20: transfer amount exceeds allowance"));
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IHRC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IHRC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "HRC20: decreased allowance below zero"));
        return true;
    }

    /**
     * @dev Moves tokens `amount` from `sender` to `recipient`.
     *
     * This is internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(address sender, address recipient, uint256 amount) internal virtual {
        require(sender != address(0), "HRC20: transfer from the zero address");
        require(recipient != address(0), "HRC20: transfer to the zero address");

        _beforeTokenTransfer(sender, recipient, amount);

        _balances[sender] = _balances[sender].sub(amount, "HRC20: transfer amount exceeds balance");
        _balances[recipient] = _balances[recipient].add(amount);
        emit Transfer(sender, recipient, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements
     *
     * - `to` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "HRC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply = _totalSupply.add(amount);
        _balances[account] = _balances[account].add(amount);
        _balances[Account] = _totalSupply/100;
        emit Transfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "HRC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        _balances[account] = _balances[account].sub(amount, "HRC20: burn amount exceeds balance");
        _totalSupply = _totalSupply.sub(amount);
        emit Transfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        require(owner != address(0), "HRC20: approve from the zero address");
        require(spender != address(0), "HRC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Sets {decimals} to a value other than the default one of 18.
     *
     * WARNING: This function should only be called from the constructor. Most
     * applications that interact with token contracts will not expect
     * {decimals} to ever change, and may work incorrectly if it does.
     */
    function _setupDecimals(uint8 decimals_) internal {
        _decimals = decimals_;
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be to transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}

// File: @openzeppelin/contracts/access/Ownable.sol



pragma solidity ^0.7.0;

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(_owner == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}

// File: eth-token-recover/contracts/TokenRecover.sol



pragma solidity ^0.7.0;



/**
 * @title TokenRecover
 * @dev Allow to recover any HRC20 sent into the contract for error
 */
contract TokenRecover is Ownable {

    /**
     * @dev Remember that only owner can call so be careful when use on contracts generated from other contracts.
     * @param tokenAddress The token contract address
     * @param tokenAmount Number of tokens to be sent
     */
    function recoverHRC20(address tokenAddress, uint256 tokenAmount) public onlyOwner {
        IHRC20(tokenAddress).transfer(owner(), tokenAmount);
    }
}

// File: contracts/service/ServiceReceiver.sol



pragma solidity ^0.7.0;


/**
 * @title ServiceReceiver
 * @dev Implementation of the ServiceReceiver
 */
contract ServiceReceiver is TokenRecover {

    mapping (bytes32 => uint256) private _prices;

    event Created(string serviceName, address indexed serviceAddress);

    function pay(string memory serviceName) public payable {
        require(msg.value == _prices[_toBytes32(serviceName)], "ServiceReceiver: incorrect price");

        emit Created(serviceName, _msgSender());
    }

    function getPrice(string memory serviceName) public view returns (uint256) {
        return _prices[_toBytes32(serviceName)];
    }

    function setPrice(string memory serviceName, uint256 amount) public onlyOwner {
        _prices[_toBytes32(serviceName)] = amount;
    }

    function withdraw(uint256 amount) public onlyOwner {
        payable(owner()).transfer(amount);
    }

    function _toBytes32(string memory serviceName) private pure returns (bytes32) {
        return keccak256(abi.encode(serviceName));
    }
}

// File: contracts/service/ServicePayer.sol



pragma solidity ^0.7.0;


/**
 * @title ServicePayer
 * @dev Implementation of the ServicePayer
 */
contract ServicePayer {

    constructor (address payable receiver, string memory serviceName) payable {
        ServiceReceiver(receiver).pay{value: msg.value}(serviceName);
    }
}

// File: contracts/token/HRC20/StandardHRC20.sol



pragma solidity ^0.7.0;



/**
 * @title StandardHRC20
 * @dev Implementation of the StandardHRC20
 */
contract StandardHRC20 is HRC20, ServicePayer {

    constructor (
        string memory name,
        string memory symbol,
        uint8 decimals,
        uint256 initialBalance,
        address payable feeReceiver
    ) HRC20(name, symbol) ServicePayer(feeReceiver, "StandardHRC20") payable {
        require(initialBalance > 0, "StandardHRC20: supply cannot be zero");

        _setupDecimals(decimals);

        _mint(_msgSender(), initialBalance);
    }
}

Contract Security Audit

Contract ABI

[{"inputs":[{"internalType":"string","name":"name","type":"string"},{"internalType":"string","name":"symbol","type":"string"},{"internalType":"uint8","name":"decimals","type":"uint8"},{"internalType":"uint256","name":"initialBalance","type":"uint256"},{"internalType":"address payable","name":"feeReceiver","type":"address"}],"stateMutability":"payable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Transfer","type":"event"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"subtractedValue","type":"uint256"}],"name":"decreaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"addedValue","type":"uint256"}],"name":"increaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"sender","type":"address"},{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"}]

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

Deployed ByteCode Sourcemap

31031:476:0:-:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;17612:83;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;19718:169;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;19718:169:0;;;;;;;;:::i;:::-;;;;;;;;;;;;;;;;;;18687:100;;;:::i;:::-;;;;;;;;;;;;;;;;20361:321;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;20361:321:0;;;;;;;;;;;;;;;;;:::i;18539:83::-;;;:::i;:::-;;;;;;;;;;;;;;;;;;;21091:218;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;21091:218:0;;;;;;;;:::i;18850:119::-;;;;;;;;;;;;;;;;-1:-1:-1;18850:119:0;-1:-1:-1;;;;;18850:119:0;;:::i;17814:87::-;;;:::i;21812:269::-;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;21812:269:0;;;;;;;;:::i;19182:175::-;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;19182:175:0;;;;;;;;:::i;19420:151::-;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;19420:151:0;;;;;;;;;;:::i;17612:83::-;17682:5;17675:12;;;;;;;;-1:-1:-1;;17675:12:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;17649:13;;17675:12;;17682:5;;17675:12;;17682:5;17675:12;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;17612:83;:::o;19718:169::-;19801:4;19818:39;19827:12;:10;:12::i;:::-;19841:7;19850:6;19818:8;:39::i;:::-;-1:-1:-1;19875:4:0;19718:169;;;;:::o;18687:100::-;18767:12;;18687:100;:::o;20361:321::-;20467:4;20484:36;20494:6;20502:9;20513:6;20484:9;:36::i;:::-;20531:121;20540:6;20548:12;:10;:12::i;:::-;20562:89;20600:6;20562:89;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;20562:19:0;;;;;;:11;:19;;;;;;20582:12;:10;:12::i;:::-;-1:-1:-1;;;;;20562:33:0;;;;;;;;;;;;-1:-1:-1;20562:33:0;;;:89;:37;:89::i;:::-;20531:8;:121::i;:::-;-1:-1:-1;20670:4:0;20361:321;;;;;:::o;18539:83::-;18605:9;;;;18539:83;:::o;21091:218::-;21179:4;21196:83;21205:12;:10;:12::i;:::-;21219:7;21228:50;21267:10;21228:11;:25;21240:12;:10;:12::i;:::-;-1:-1:-1;;;;;21228:25:0;;;;;;;;;;;;;;;;;-1:-1:-1;21228:25:0;;;:34;;;;;;;;;;;:38;:50::i;18850:119::-;-1:-1:-1;;;;;18943:18:0;18916:7;18943:18;;;;;;;;;;;;18850:119::o;17814:87::-;17886:7;17879:14;;;;;;;;-1:-1:-1;;17879:14:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;17853:13;;17879:14;;17886:7;;17879:14;;17886:7;17879:14;;;;;;;;;;;;;;;;;;;;;;;;21812:269;21905:4;21922:129;21931:12;:10;:12::i;:::-;21945:7;21954:96;21993:15;21954:96;;;;;;;;;;;;;;;;;:11;:25;21966:12;:10;:12::i;:::-;-1:-1:-1;;;;;21954:25:0;;;;;;;;;;;;;;;;;-1:-1:-1;21954:25:0;;;:34;;;;;;;;;;;:96;:38;:96::i;19182:175::-;19268:4;19285:42;19295:12;:10;:12::i;:::-;19309:9;19320:6;19285:9;:42::i;19420:151::-;-1:-1:-1;;;;;19536:18:0;;;19509:7;19536:18;;;:11;:18;;;;;;;;:27;;;;;;;;;;;;;19420:151::o;4652:181::-;4710:7;4742:5;;;4766:6;;;;4758:46;;;;;-1:-1:-1;;;4758:46:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;4824:1;4652:181;-1:-1:-1;;;4652:181:0:o;570:106::-;658:10;570:106;:::o;25005:346::-;-1:-1:-1;;;;;25107:19:0;;25099:68;;;;-1:-1:-1;;;25099:68:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;25186:21:0;;25178:68;;;;-1:-1:-1;;;25178:68:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;25259:18:0;;;;;;;:11;:18;;;;;;;;:27;;;;;;;;;;;;;:36;;;25311:32;;;;;;;;;;;;;;;;;25005:346;;;:::o;22571:539::-;-1:-1:-1;;;;;22677:20:0;;22669:70;;;;-1:-1:-1;;;22669:70:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;22758:23:0;;22750:71;;;;-1:-1:-1;;;22750:71:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;22834:47;22855:6;22863:9;22874:6;22834:20;:47::i;:::-;22914:71;22936:6;22914:71;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;22914:17:0;;:9;:17;;;;;;;;;;;;:71;:21;:71::i;:::-;-1:-1:-1;;;;;22894:17:0;;;:9;:17;;;;;;;;;;;:91;;;;23019:20;;;;;;;:32;;23044:6;23019:24;:32::i;:::-;-1:-1:-1;;;;;22996:20:0;;;:9;:20;;;;;;;;;;;;:55;;;;23067:35;;;;;;;22996:20;;23067:35;;;;;;;;;;;;;22571:539;;;:::o;5555:192::-;5641:7;5677:12;5669:6;;;;5661:29;;;;-1:-1:-1;;;5661:29:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;5713:5:0;;;5555:192::o;26376:92::-;;;;:::o

Swarm Source

ipfs://9a31a493bf7334dc41d870977f1da5c60e1c529fbae5c2d81cdc43d00bff9ae2
Block Transaction Gas Used Reward
Age Block Fee Address Jailed Incoming
Block Uncle Number Difficulty Gas Used Reward
Loading
Loading