Contract 0xbf01Dd36C7acf0824AF2Cb2C739b2A98E5A4ae6f 1

Contract Overview

Balance:
0 HT

HT Value:
$0.00

Token:
Txn Hash Method
Block
From
To
Value [Txn Fee]
0xc9861d87812b4778769b30624339b9a70418a219401485e2b49d3705bf1c2d9cEnd158350942022-06-05 3:23:3221 days 5 hrs ago0x905f381366ffc53f8a3f4fe7e253208fbf76e26c IN  0xbf01dd36c7acf0824af2cb2c739b2a98e5a4ae6f0 HT0.000541793252.25
0x7a265cc875a323a2a9c1cb257a1f09ed4e573220bad5cb700509f83e190038b3Start155611212022-05-26 15:04:4630 days 17 hrs ago0x72762f09f91f16b0462fbadbc9367988fcf304fb IN  0xbf01dd36c7acf0824af2cb2c739b2a98e5a4ae6f0 HT0.0003911805 2.25
0x66bb878d3a063485463a6fc9f437f46bc6da6dded49384a8290db69842f15e0dEnd154063752022-05-21 6:07:2836 days 2 hrs ago0x813f94003ea9f7847e39c35f76c8a814229b4bca IN  0xbf01dd36c7acf0824af2cb2c739b2a98e5a4ae6f0 HT0.000541793252.25
0xa47d94a82e9793bdd57e24c5f50764be2e68cd6bd7ec3bc2186e66a0f9d77759Start152818782022-05-16 22:22:3340 days 10 hrs ago0x9eef67737ac8c8295846432a299a792bd85105a8 IN  0xbf01dd36c7acf0824af2cb2c739b2a98e5a4ae6f0 HT0.00039118052.25
0x62f90385f9bc1bcb7ae4f91620defff38030a718ec5463cdf8aa76bd9b958694Start151573052022-05-12 14:33:5044 days 17 hrs ago0x9208510d23bbf7a0411b371e44c2a0ac0cbb9d4a IN  0xbf01dd36c7acf0824af2cb2c739b2a98e5a4ae6f0 HT0.00039118052.25
0xea7e7efc3e7e6d6cd7e4639e722b37f20f207f101fda6140719ab968eccee9a4Start150342002022-05-08 7:58:2549 days 31 mins ago0x23d033eb30f92331f07117918bfeaa1c2d1481db IN  0xbf01dd36c7acf0824af2cb2c739b2a98e5a4ae6f0 HT0.00042965552.25
0x33c8fd77449c832d207a6d23999099035b088af7b6d7e7fe6983a62ba636246eStart148960312022-05-03 12:49:4153 days 19 hrs ago0x83278d50e041196e2d8a63755fdb7d3802c8c9f9 IN  0xbf01dd36c7acf0824af2cb2c739b2a98e5a4ae6f0 HT0.00041885552.25
0x5fd737f67aafd5da1f77dfe17240b882678c2d8060ca792e633041c91c9345b6Start147757382022-04-29 8:34:3857 days 23 hrs ago0xaa3fa35b32e6cf8f55fa1a882b07be1964516c1c IN  0xbf01dd36c7acf0824af2cb2c739b2a98e5a4ae6f0 HT0.00039115352.25
0x1f95b2f629af06ff1f08c288488c98a010d32a3ac42cc0236a03cdd44a2e0234End147756722022-04-29 8:31:2057 days 23 hrs ago0xaa3fa35b32e6cf8f55fa1a882b07be1964516c1c IN  0xbf01dd36c7acf0824af2cb2c739b2a98e5a4ae6f0 HT0.000541793252.25
0xb9c144956a0e8b22465b3d243406be171beaa5ef29ae9348cd84161ab667be71End147472192022-04-28 8:48:4158 days 23 hrs ago0xaa3fa35b32e6cf8f55fa1a882b07be1964516c1c IN  0xbf01dd36c7acf0824af2cb2c739b2a98e5a4ae6f0 HT0.000541820252.25
0x77c57d032e69196f612fa3eaaa3546c72a39198cfdf7b54e7cb4567eed1371b0End147232242022-04-27 12:48:4659 days 19 hrs ago0x949edd40710413a1cdc7eaae89f33adfe041b42a IN  0xbf01dd36c7acf0824af2cb2c739b2a98e5a4ae6f0 HT0.000541793252.25
0x69d671b6b1485f05bbead23d81fbb1b1469a48c86594a123517c00d2692696f3Start146844972022-04-26 4:32:2561 days 3 hrs ago0xf913b3038a0f4c63e963d39efb1442807c76c221 IN  0xbf01dd36c7acf0824af2cb2c739b2a98e5a4ae6f0 HT0.00039118052.25
0x1ea9182d3fd8d37e1bce1d66d4642e32dd61f3ce86919f94e95c1995b0fa11c8End146844522022-04-26 4:30:1061 days 3 hrs ago0xf913b3038a0f4c63e963d39efb1442807c76c221 IN  0xbf01dd36c7acf0824af2cb2c739b2a98e5a4ae6f0 HT0.000541793252.25
0x16d9eaafac31e15c10d117ddccf781b23cafeb3418d05bdbe61e16c15d4cf245Start145157052022-04-20 7:52:3867 days 37 mins ago0x3f180712654cf1f1a85c2a4804f942414ab912b6 IN  0xbf01dd36c7acf0824af2cb2c739b2a98e5a4ae6f0 HT0.00039115352.25
0x43b2b3f57d26c151d8b6340f32ba1c73ca7ee50aab2f23708f3190572eecc544End145155232022-04-20 7:43:3267 days 46 mins ago0x3f180712654cf1f1a85c2a4804f942414ab912b6 IN  0xbf01dd36c7acf0824af2cb2c739b2a98e5a4ae6f0 HT0.000541793252.25
0x8a285ba73365d1cf72ceb63520b4026fd6732de59ed6adea45ea3302dfedc716Start142787452022-04-12 2:24:3675 days 6 hrs ago0xa4604bdc86e51f14a5dc8bfff85e1aa6665a28a5 IN  0xbf01dd36c7acf0824af2cb2c739b2a98e5a4ae6f0 HT0.00039118052.25
0x8e03fd121744e64519ba33e6fd963715f6598df1bb0b63207c1d92903fc29780End142786532022-04-12 2:20:0075 days 6 hrs ago0xa4604bdc86e51f14a5dc8bfff85e1aa6665a28a5 IN  0xbf01dd36c7acf0824af2cb2c739b2a98e5a4ae6f0 HT0.000541793252.25
0xd0bae8e1b896833a789fdae427c23d5a4b920396f92186a02c4a0b8c55c159b7Start142736512022-04-11 22:09:5475 days 10 hrs ago0x725c740af20407b2387bc756043701fa68bfd345 IN  0xbf01dd36c7acf0824af2cb2c739b2a98e5a4ae6f0 HT0.00042965552.25
0x849b8d5cf2ea3274f44dc34a777a4c5ccf74004d53b369256f52b6c38a9c89b9Start142670752022-04-11 16:41:0675 days 15 hrs ago0x9208510d23bbf7a0411b371e44c2a0ac0cbb9d4a IN  0xbf01dd36c7acf0824af2cb2c739b2a98e5a4ae6f0 HT0.00042962852.25
0xc4ba9a30f6e0eda71e57eb76c0ac76adaca9d79508473e2de1e3b4de6e026a7bStart141736562022-04-08 10:50:0978 days 21 hrs ago0x916a6d1e76173a7d3e86d82fe0eb1748b19180c4 IN  0xbf01dd36c7acf0824af2cb2c739b2a98e5a4ae6f0 HT0.00042965552.25
0xde6524be212a258c13a5c31dd5f7e71e471971a7a01eb1276b6018b8a901b48fStart140415342022-04-03 20:44:0383 days 11 hrs ago0x949edd40710413a1cdc7eaae89f33adfe041b42a IN  0xbf01dd36c7acf0824af2cb2c739b2a98e5a4ae6f0 HT0.00042965552.25
0x3c1b9049ec57150548cf6f23299dbc0ccb87adb7d7b8b5a947e2f39922b04476Start140177212022-04-03 0:53:2484 days 7 hrs ago0x869d116692c93083de61b56f12390a4d55ed61c6 IN  0xbf01dd36c7acf0824af2cb2c739b2a98e5a4ae6f0 HT0.00042962852.25
0x4106967af912fc74866ab5ed8b3db1528dc0174ca8a720bd8ad6a984986717c1Start140054392022-04-02 14:39:1884 days 17 hrs ago0xaa3fa35b32e6cf8f55fa1a882b07be1964516c1c IN  0xbf01dd36c7acf0824af2cb2c739b2a98e5a4ae6f0 HT0.00039118052.25
0xeea4627ca2056e6aaefc3fa4e3fe8f8a39c02ed0215536e03aef44f34c06ec95Start139902012022-04-02 1:57:2485 days 6 hrs ago0x5edfe089a2856d67906df3eaf4520bf3470e9a5d IN  0xbf01dd36c7acf0824af2cb2c739b2a98e5a4ae6f0 HT0.0003911805 2.25
0x93f1ab8a9d5069c4c5b7835ac5952d02e29601aa8a43bf8a04fc37e95fc3bd8bStart139634572022-04-01 3:40:1286 days 4 hrs ago0x5d8f954b932c4d2e77ed63df5abc546a4f64bdd8 IN  0xbf01dd36c7acf0824af2cb2c739b2a98e5a4ae6f0 HT0.0003911805 2.25
[ Download CSV Export 
Latest 1 internal transaction
Parent Txn Hash Block From To Value
0x2d3b4e39d8bc2c2bd7e124b81c250c9aa6f33c42f3fdef8027e77e077193b673135310172022-03-17 3:18:04101 days 5 hrs ago 0x06e69130ce0a099483fd01b34f4251c3decf1294  Contract Creation0 HT
[ Download CSV Export 
Loading

Similar Match Source Code
Note: This contract matches the deployed ByteCode of the Source Code for Contract 0xfdEa5c7A617e151fef08dC6398fc44f1918354Ee

Contract Name:
Stakes

Compiler Version
v0.8.4+commit.c7e474f2

Optimization Enabled:
Yes with 200 runs

Other Settings:
default evmVersion, MIT license

Contract Source Code (Solidity Standard Json-Input format)

File 1 of 1 : Ube.sol
// SPDX-License-Identifier: MIT

/**

MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM
MMMMMMMMMMMMMMMMMMMMMMMMMMMMWWWWWWWWWWWWWWWMMMMMMMMMMMMMMMMMMMMMMMMMMM
MMMMMMMMMMMMMMMMMMMMMMWWNXXKKKKKKKXXXXKKKKKKXXNWWMMMMMMMMMMMMMMMMMMMMM
MMMMMMMMMMMMMMMMMMWNXKKKKXXNWWWWMMWWWWMWWWWNXXXKKKXNWMMMMMMMMMMMMMMMMM
MMMMMMMMMMMMMMMWNXKKKXNWMMMMMMMMMNOdxKWMMMMMMMMWNXKKKXNWMMMMMMMMMMMMMM
MMMMMMMMMMMMMWXKKKNWMMMMMMMMMMMMNx:;;l0WMMMMMMMMMMMWNK0KXWMMMMMMMMMMMM
MMMMMMMMMMMWXKKXWMMMMMMMMMMMMMMXd:;;;;cOWMMMMMMMMMMMMMWXKKXWMMMMMMMMMM
MMMMMMMMMWNKKXWMMMMMMMMMMMMMMWKo;;col:;:kNMMMMMMMMMMMMMMWX0KNWMMMMMMMM
MMMMMMMMWX0XWMMMMMMMMMMMMMMMWOl;;oKWXkc;:dXMMMMMMMMMMMMMMMWX0XWMMMMMMM
MMMMMMMNKKNWMMMMMMMMMMMMMMMNkc;:dXMMMWOc;;oKWMMMMMMMMMMMMMMWNKKNMMMMMM
MMMMMMNKKNMMMMMMMMMMMMMMMMNx:;:xNMMMMMW0l;;l0WMMMMMMMWMMMMMMMNKKNMMMMM
MMMMMNKKNMMMMMMMMMMMMMMMMXd:;ckNMMMMMMMMKo:;cOWMMMMXkxkXWMMMMMNKKNMMMM
MMMMWK0NMMMMMMMMMMMMMMMWKo;;l0WMMMMMMMMMMXx:;:xNMMW0lccxXMMMMMMN0KWMMM
MMMMX0XWMMMMMMWWMMMMMMWOl;;oKWMMMMMMMMMMMMNkc;:dXMMNklcoKMMMMMMMX0XMMM
MMMWKKNMMWK0OkkkkkkKWNkc;:dXMMMMMMMMMMMMMMMWOl;;oKWMXdcxNMMMMMMMNKKWMM
MMMN0XWMMWNXX0OdlccdKOc;:xNMMMWXKKXNWNNNNWWMW0o;;l0WNkdKWMMMMMMMWX0NMM
MMMX0XMMMMMMMMMN0dlcdOxoONMMMMW0xdddddodxk0KNWXd:;l0Kx0WMMMMMMMMMX0XMM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:;cOWMWKo:;c0WMMMMMMMMMMMMMMWX0KNMMMMMMM
MMMMMMMMMWXKKNWMMMMMMMMMMMMMMXd:;cx0kl;;l0WMMMMMMMMMMMMMWNKKXWMMMMMMMM
MMMMMMMMMMMWX0KNWMMMMMMMMMMMMMNkc;;::;:oKWMMMMMMMMMMMMWNK0XWMMMMMMMMMM
MMMMMMMMMMMMMNXKKXNWMMMMMMMMMMMWOc;;;:dXMMMMMMMMMMMWNXKKXWMMMMMMMMMMMM
MMMMMMMMMMMMMMMWNKKKXNWMMMMMMMMMW0l:ckNMMMMMMMMMWNXKKKNWMMMMMMMMMMMMMM
MMMMMMMMMMMMMMMMMMWNXKKKXXNWWWMMMMX0KWMMMWWWNXXKKKXNWMMMMMMMMMMMMMMMMM
MMMMMMMMMMMMMMMMMMMMMWWNXXKKKKKXXXXXXXXXXKKKKXXNWWMMMMMMMMMMMMMMMMMMMM
MMMMMMMMMMMMMMMMMMMMMMMMMMMWWNNNNNNNNNNNNWWWMMMMMMMMMMMMMMMMMMMMMMMMMM
MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM


---------------------- [ WPSmartContracts.com ] ----------------------

                       [ Blockchain Made Easy ]


    |
    |  Stakes v.2
    |
    |----------------------------
    |
    |  Flavor
    |
    |  >  Ube: Fully featured ERC-20 Staking contract with maturity time 
    |          and an annual interest 
    |

*/

pragma solidity ^0.8.2;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        // Solidity only automatically asserts when dividing by 0
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}

/**
 * @title Owner
 * @dev Set & change owner
 */
contract Owner {

    address private owner;
    
    // event for EVM logging
    event OwnerSet(address indexed oldOwner, address indexed newOwner);
    
    // modifier to check if caller is owner
    modifier isOwner() {
        // If the first argument of 'require' evaluates to 'false', execution terminates and all
        // changes to the state and to Ether balances are reverted.
        // This used to consume all gas in old EVM versions, but not anymore.
        // It is often a good idea to use 'require' to check if functions are called correctly.
        // As a second argument, you can also provide an explanation about what went wrong.
        require(msg.sender == owner, "Caller is not owner");
        _;
    }
    
    /**
     * @dev Set contract deployer as owner
     */
    constructor(address _owner) {
        owner = _owner;
        emit OwnerSet(address(0), owner);
    }

    /**
     * @dev Change owner
     * @param newOwner address of new owner
     */
    function changeOwner(address newOwner) public isOwner {
        emit OwnerSet(owner, newOwner);
        owner = newOwner;
    }

    /**
     * @dev Return owner address 
     * @return address of owner
     */
    function getOwner() public view returns (address) {
        return owner;
    }
}

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    constructor() {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and making it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        // On the first call to nonReentrant, _notEntered will be true
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;

        _;

        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
}

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 *
 * _Available since v4.1._
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20, IERC20Metadata {
    mapping(address => uint256) private _balances;

    mapping(address => mapping(address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * The default value of {decimals} is 18. To select a different value for
     * {decimals} you should overload it.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless this function is
     * overridden;
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual override returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * Requirements:
     *
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for ``sender``'s tokens of at least
     * `amount`.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) public virtual override returns (bool) {
        _transfer(sender, recipient, amount);

        uint256 currentAllowance = _allowances[sender][_msgSender()];
        require(currentAllowance >= amount, "ERC20: transfer amount exceeds allowance");
        unchecked {
            _approve(sender, _msgSender(), currentAllowance - amount);
        }

        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue);
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        uint256 currentAllowance = _allowances[_msgSender()][spender];
        require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
        unchecked {
            _approve(_msgSender(), spender, currentAllowance - subtractedValue);
        }

        return true;
    }

    /**
     * @dev Moves `amount` of tokens from `sender` to `recipient`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(
        address sender,
        address recipient,
        uint256 amount
    ) internal virtual {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(sender, recipient, amount);

        uint256 senderBalance = _balances[sender];
        require(senderBalance >= amount, "ERC20: transfer amount exceeds balance");
        unchecked {
            _balances[sender] = senderBalance - amount;
        }
        _balances[recipient] += amount;

        emit Transfer(sender, recipient, amount);

        _afterTokenTransfer(sender, recipient, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply += amount;
        _balances[account] += amount;
        emit Transfer(address(0), account, amount);

        _afterTokenTransfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        uint256 accountBalance = _balances[account];
        require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
        unchecked {
            _balances[account] = accountBalance - amount;
        }
        _totalSupply -= amount;

        emit Transfer(account, address(0), amount);

        _afterTokenTransfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(
        address owner,
        address spender,
        uint256 amount
    ) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {}

    /**
     * @dev Hook that is called after any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * has been transferred to `to`.
     * - when `from` is zero, `amount` tokens have been minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens have been burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _afterTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {}
}

/**
 * 
 * Stakes is an interest gain contract for ERC-20 tokens
 * 
 * assets is the ERC20 token
 * interest_rate: percentage rate
 * maturity is the time in seconds after which is safe to end the stake
 * penalization for ending a stake before maturity time
 * lower_amount is the minimum amount for creating a stake
 * 
 */
contract Stakes is Owner, ReentrancyGuard {

    using SafeMath for uint256;

    // token    
    ERC20 public asset;

    // stakes history
    struct Record {
        uint256 from;
        uint256 amount;
        uint256 gain;
        uint256 penalization;
        uint256 to;
        bool ended;
    }

    // contract parameters
    uint8 public interest_rate;
    uint256 public maturity;
    uint8 public penalization;
    uint256 public lower_amount;

    mapping(address => Record[]) public ledger;

    event StakeStart(address indexed user, uint256 value, uint256 index);
    event StakeEnd(address indexed user, uint256 value, uint256 penalty, uint256 interest, uint256 index);
    
    constructor(ERC20 _erc20, address _owner, uint8 _rate, uint256 _maturity, uint8 _penalization, uint256 _lower) Owner(_owner) {
        require(_penalization<=100, "Penalty has to be an integer between 0 and 100");
        asset = _erc20;
        interest_rate = _rate;
        maturity = _maturity;
        penalization = _penalization;
        lower_amount = _lower;
    }
    
    function start(uint256 _value) external {
        require(_value >= lower_amount, "Invalid value");
        asset.transferFrom(msg.sender, address(this), _value);
        ledger[msg.sender].push(Record(block.timestamp, _value, 0, 0, 0, false));
        emit StakeStart(msg.sender, _value, ledger[msg.sender].length-1);
    }

    function end(uint256 i) external nonReentrant {

        require(i < ledger[msg.sender].length, "Invalid index");
        require(ledger[msg.sender][i].ended==false, "Invalid stake");
        
        // penalization
        if(block.timestamp.sub(ledger[msg.sender][i].from) < maturity) {
            uint256 _penalization = ledger[msg.sender][i].amount.mul(penalization).div(100);
            asset.transfer(msg.sender, ledger[msg.sender][i].amount.sub(_penalization));
            asset.transfer(getOwner(), _penalization);
            ledger[msg.sender][i].penalization = _penalization;
            ledger[msg.sender][i].to = block.timestamp;
            ledger[msg.sender][i].ended = true;
            emit StakeEnd(msg.sender, ledger[msg.sender][i].amount, _penalization, 0, i);
        // interest gained
        } else {
            uint256 _interest = get_gains(msg.sender, i);
            // check that the owner can pay interest before trying to pay
            if (asset.allowance(getOwner(), address(this)) >= _interest && asset.balanceOf(getOwner()) >= _interest) {
                asset.transferFrom(getOwner(), msg.sender, _interest);
            } else {
                _interest = 0;
            }
            asset.transfer(msg.sender, ledger[msg.sender][i].amount);
            ledger[msg.sender][i].gain = _interest;
            ledger[msg.sender][i].to = block.timestamp;
            ledger[msg.sender][i].ended = true;
            emit StakeEnd(msg.sender, ledger[msg.sender][i].amount, 0, _interest, i);
        }
    }

    function set(uint256 _lower, uint256 _maturity, uint8 _rate, uint8 _penalization) public isOwner {
        require(_penalization<=100, "Invalid value");
        lower_amount = _lower;
        maturity = _maturity;
        interest_rate = _rate;
        penalization = _penalization;
    }
    
    // calculate interest to the current date time
    function get_gains(address _address, uint256 _rec_number) public view returns (uint256) {
        uint256 _record_seconds = block.timestamp.sub(ledger[_address][_rec_number].from);
        uint256 _year_seconds = 365*24*60*60;
        return _record_seconds.mul(
            ledger[_address][_rec_number].amount.mul(interest_rate).div(100)
        ).div(_year_seconds);
    }

    function ledger_length(address _address) public view returns (uint256) {
        return ledger[_address].length;
    }

}

Settings
{
  "evmVersion": "istanbul",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs",
    "useLiteralContent": true
  },
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "remappings": [],
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "abi"
      ]
    }
  }
}

Contract Security Audit

Contract ABI

[{"inputs":[{"internalType":"contract ERC20","name":"_erc20","type":"address"},{"internalType":"address","name":"_owner","type":"address"},{"internalType":"uint8","name":"_rate","type":"uint8"},{"internalType":"uint256","name":"_maturity","type":"uint256"},{"internalType":"uint8","name":"_penalization","type":"uint8"},{"internalType":"uint256","name":"_lower","type":"uint256"}],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"oldOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnerSet","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"penalty","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"interest","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"index","type":"uint256"}],"name":"StakeEnd","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"index","type":"uint256"}],"name":"StakeStart","type":"event"},{"inputs":[],"name":"asset","outputs":[{"internalType":"contract ERC20","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"changeOwner","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"i","type":"uint256"}],"name":"end","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"getOwner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_address","type":"address"},{"internalType":"uint256","name":"_rec_number","type":"uint256"}],"name":"get_gains","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"interest_rate","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"},{"internalType":"uint256","name":"","type":"uint256"}],"name":"ledger","outputs":[{"internalType":"uint256","name":"from","type":"uint256"},{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"uint256","name":"gain","type":"uint256"},{"internalType":"uint256","name":"penalization","type":"uint256"},{"internalType":"uint256","name":"to","type":"uint256"},{"internalType":"bool","name":"ended","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_address","type":"address"}],"name":"ledger_length","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"lower_amount","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"maturity","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"penalization","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_lower","type":"uint256"},{"internalType":"uint256","name":"_maturity","type":"uint256"},{"internalType":"uint8","name":"_rate","type":"uint8"},{"internalType":"uint8","name":"_penalization","type":"uint8"}],"name":"set","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_value","type":"uint256"}],"name":"start","outputs":[],"stateMutability":"nonpayable","type":"function"}]

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

Block Transaction Gas Used Reward
Age Block Fee Address Jailed Incoming
Block Uncle Number Difficulty Gas Used Reward
Loading
Loading