Contract
0x96a29c4bce3126266983f535b41c30dba80d5d99
1
Contract Overview
My Name Tag:
Not Available, login to update
[ Download CSV Export ]
Contract Name:
AutoFarmV2_CrossChain
Compiler Version
v0.6.12+commit.27d51765
Contract Source Code (Solidity)
/** *Submitted for verification at hecoinfo.com on 2021-04-16 */ // SPDX-License-Identifier: MIT pragma solidity 0.6.12; // import "https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/token/ERC20/ERC20.sol"; abstract contract Context { function _msgSender() internal view virtual returns (address payable) { return msg.sender; } function _msgData() internal view virtual returns (bytes memory) { this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691 return msg.data; } } library SafeMath { /** * @dev Returns the addition of two unsigned integers, reverting on * overflow. * * Counterpart to Solidity's `+` operator. * * Requirements: * * - Addition cannot overflow. */ function add(uint256 a, uint256 b) internal pure returns (uint256) { uint256 c = a + b; require(c >= a, "SafeMath: addition overflow"); return c; } /** * @dev Returns the subtraction of two unsigned integers, reverting on * overflow (when the result is negative). * * Counterpart to Solidity's `-` operator. * * Requirements: * * - Subtraction cannot overflow. */ function sub(uint256 a, uint256 b) internal pure returns (uint256) { return sub(a, b, "SafeMath: subtraction overflow"); } /** * @dev Returns the subtraction of two unsigned integers, reverting with custom message on * overflow (when the result is negative). * * Counterpart to Solidity's `-` operator. * * Requirements: * * - Subtraction cannot overflow. */ function sub( uint256 a, uint256 b, string memory errorMessage ) internal pure returns (uint256) { require(b <= a, errorMessage); uint256 c = a - b; return c; } /** * @dev Returns the multiplication of two unsigned integers, reverting on * overflow. * * Counterpart to Solidity's `*` operator. * * Requirements: * * - Multiplication cannot overflow. */ function mul(uint256 a, uint256 b) internal pure returns (uint256) { // Gas optimization: this is cheaper than requiring 'a' not being zero, but the // benefit is lost if 'b' is also tested. // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522 if (a == 0) { return 0; } uint256 c = a * b; require(c / a == b, "SafeMath: multiplication overflow"); return c; } /** * @dev Returns the integer division of two unsigned integers. Reverts on * division by zero. The result is rounded towards zero. * * Counterpart to Solidity's `/` operator. Note: this function uses a * `revert` opcode (which leaves remaining gas untouched) while Solidity * uses an invalid opcode to revert (consuming all remaining gas). * * Requirements: * * - The divisor cannot be zero. */ function div(uint256 a, uint256 b) internal pure returns (uint256) { return div(a, b, "SafeMath: division by zero"); } /** * @dev Returns the integer division of two unsigned integers. Reverts with custom message on * division by zero. The result is rounded towards zero. * * Counterpart to Solidity's `/` operator. Note: this function uses a * `revert` opcode (which leaves remaining gas untouched) while Solidity * uses an invalid opcode to revert (consuming all remaining gas). * * Requirements: * * - The divisor cannot be zero. */ function div( uint256 a, uint256 b, string memory errorMessage ) internal pure returns (uint256) { require(b > 0, errorMessage); uint256 c = a / b; // assert(a == b * c + a % b); // There is no case in which this doesn't hold return c; } /** * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo), * Reverts when dividing by zero. * * Counterpart to Solidity's `%` operator. This function uses a `revert` * opcode (which leaves remaining gas untouched) while Solidity uses an * invalid opcode to revert (consuming all remaining gas). * * Requirements: * * - The divisor cannot be zero. */ function mod(uint256 a, uint256 b) internal pure returns (uint256) { return mod(a, b, "SafeMath: modulo by zero"); } /** * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo), * Reverts with custom message when dividing by zero. * * Counterpart to Solidity's `%` operator. This function uses a `revert` * opcode (which leaves remaining gas untouched) while Solidity uses an * invalid opcode to revert (consuming all remaining gas). * * Requirements: * * - The divisor cannot be zero. */ function mod( uint256 a, uint256 b, string memory errorMessage ) internal pure returns (uint256) { require(b != 0, errorMessage); return a % b; } } interface IERC20 { /** * @dev Returns the amount of tokens in existence. */ function totalSupply() external view returns (uint256); /** * @dev Returns the amount of tokens owned by `account`. */ function balanceOf(address account) external view returns (uint256); /** * @dev Moves `amount` tokens from the caller's account to `recipient`. * * Returns a boolean value indicating whether the operation succeeded. * * Emits a {Transfer} event. */ function transfer(address recipient, uint256 amount) external returns (bool); /** * @dev Returns the remaining number of tokens that `spender` will be * allowed to spend on behalf of `owner` through {transferFrom}. This is * zero by default. * * This value changes when {approve} or {transferFrom} are called. */ function allowance(address owner, address spender) external view returns (uint256); /** * @dev Sets `amount` as the allowance of `spender` over the caller's tokens. * * Returns a boolean value indicating whether the operation succeeded. * * IMPORTANT: Beware that changing an allowance with this method brings the risk * that someone may use both the old and the new allowance by unfortunate * transaction ordering. One possible solution to mitigate this race * condition is to first reduce the spender's allowance to 0 and set the * desired value afterwards: * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729 * * Emits an {Approval} event. */ function approve(address spender, uint256 amount) external returns (bool); /** * @dev Moves `amount` tokens from `sender` to `recipient` using the * allowance mechanism. `amount` is then deducted from the caller's * allowance. * * Returns a boolean value indicating whether the operation succeeded. * * Emits a {Transfer} event. */ function transferFrom( address sender, address recipient, uint256 amount ) external returns (bool); /** * @dev Emitted when `value` tokens are moved from one account (`from`) to * another (`to`). * * Note that `value` may be zero. */ event Transfer(address indexed from, address indexed to, uint256 value); /** * @dev Emitted when the allowance of a `spender` for an `owner` is set by * a call to {approve}. `value` is the new allowance. */ event Approval( address indexed owner, address indexed spender, uint256 value ); } contract ERC20 is Context, IERC20 { using SafeMath for uint256; mapping(address => uint256) private _balances; mapping(address => mapping(address => uint256)) private _allowances; uint256 private _totalSupply; string private _name; string private _symbol; uint8 private _decimals; /** * @dev Sets the values for {name} and {symbol}, initializes {decimals} with * a default value of 18. * * To select a different value for {decimals}, use {_setupDecimals}. * * All three of these values are immutable: they can only be set once during * construction. */ constructor(string memory name_, string memory symbol_) public { _name = name_; _symbol = symbol_; _decimals = 18; } /** * @dev Returns the name of the token. */ function name() public view returns (string memory) { return _name; } /** * @dev Returns the symbol of the token, usually a shorter version of the * name. */ function symbol() public view returns (string memory) { return _symbol; } /** * @dev Returns the number of decimals used to get its user representation. * For example, if `decimals` equals `2`, a balance of `505` tokens should * be displayed to a user as `5,05` (`505 / 10 ** 2`). * * Tokens usually opt for a value of 18, imitating the relationship between * Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is * called. * * NOTE: This information is only used for _display_ purposes: it in * no way affects any of the arithmetic of the contract, including * {IERC20-balanceOf} and {IERC20-transfer}. */ function decimals() public view returns (uint8) { return _decimals; } /** * @dev See {IERC20-totalSupply}. */ function totalSupply() public view override returns (uint256) { return _totalSupply; } /** * @dev See {IERC20-balanceOf}. */ function balanceOf(address account) public view override returns (uint256) { return _balances[account]; } /** * @dev See {IERC20-transfer}. * * Requirements: * * - `recipient` cannot be the zero address. * - the caller must have a balance of at least `amount`. */ function transfer(address recipient, uint256 amount) public virtual override returns (bool) { _transfer(_msgSender(), recipient, amount); return true; } /** * @dev See {IERC20-allowance}. */ function allowance(address owner, address spender) public view virtual override returns (uint256) { return _allowances[owner][spender]; } /** * @dev See {IERC20-approve}. * * Requirements: * * - `spender` cannot be the zero address. */ function approve(address spender, uint256 amount) public virtual override returns (bool) { _approve(_msgSender(), spender, amount); return true; } /** * @dev See {IERC20-transferFrom}. * * Emits an {Approval} event indicating the updated allowance. This is not * required by the EIP. See the note at the beginning of {ERC20}. * * Requirements: * * - `sender` and `recipient` cannot be the zero address. * - `sender` must have a balance of at least `amount`. * - the caller must have allowance for ``sender``'s tokens of at least * `amount`. */ function transferFrom( address sender, address recipient, uint256 amount ) public virtual override returns (bool) { _transfer(sender, recipient, amount); _approve( sender, _msgSender(), _allowances[sender][_msgSender()].sub( amount, "ERC20: transfer amount exceeds allowance" ) ); return true; } /** * @dev Atomically increases the allowance granted to `spender` by the caller. * * This is an alternative to {approve} that can be used as a mitigation for * problems described in {IERC20-approve}. * * Emits an {Approval} event indicating the updated allowance. * * Requirements: * * - `spender` cannot be the zero address. */ function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) { _approve( _msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue) ); return true; } /** * @dev Atomically decreases the allowance granted to `spender` by the caller. * * This is an alternative to {approve} that can be used as a mitigation for * problems described in {IERC20-approve}. * * Emits an {Approval} event indicating the updated allowance. * * Requirements: * * - `spender` cannot be the zero address. * - `spender` must have allowance for the caller of at least * `subtractedValue`. */ function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) { _approve( _msgSender(), spender, _allowances[_msgSender()][spender].sub( subtractedValue, "ERC20: decreased allowance below zero" ) ); return true; } /** * @dev Moves tokens `amount` from `sender` to `recipient`. * * This is internal function is equivalent to {transfer}, and can be used to * e.g. implement automatic token fees, slashing mechanisms, etc. * * Emits a {Transfer} event. * * Requirements: * * - `sender` cannot be the zero address. * - `recipient` cannot be the zero address. * - `sender` must have a balance of at least `amount`. */ function _transfer( address sender, address recipient, uint256 amount ) internal virtual { require(sender != address(0), "ERC20: transfer from the zero address"); require(recipient != address(0), "ERC20: transfer to the zero address"); _beforeTokenTransfer(sender, recipient, amount); _balances[sender] = _balances[sender].sub( amount, "ERC20: transfer amount exceeds balance" ); _balances[recipient] = _balances[recipient].add(amount); emit Transfer(sender, recipient, amount); } /** @dev Creates `amount` tokens and assigns them to `account`, increasing * the total supply. * * Emits a {Transfer} event with `from` set to the zero address. * * Requirements: * * - `to` cannot be the zero address. */ function _mint(address account, uint256 amount) internal virtual { require(account != address(0), "ERC20: mint to the zero address"); _beforeTokenTransfer(address(0), account, amount); _totalSupply = _totalSupply.add(amount); _balances[account] = _balances[account].add(amount); emit Transfer(address(0), account, amount); } /** * @dev Destroys `amount` tokens from `account`, reducing the * total supply. * * Emits a {Transfer} event with `to` set to the zero address. * * Requirements: * * - `account` cannot be the zero address. * - `account` must have at least `amount` tokens. */ function _burn(address account, uint256 amount) internal virtual { require(account != address(0), "ERC20: burn from the zero address"); _beforeTokenTransfer(account, address(0), amount); _balances[account] = _balances[account].sub( amount, "ERC20: burn amount exceeds balance" ); _totalSupply = _totalSupply.sub(amount); emit Transfer(account, address(0), amount); } /** * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens. * * This internal function is equivalent to `approve`, and can be used to * e.g. set automatic allowances for certain subsystems, etc. * * Emits an {Approval} event. * * Requirements: * * - `owner` cannot be the zero address. * - `spender` cannot be the zero address. */ function _approve( address owner, address spender, uint256 amount ) internal virtual { require(owner != address(0), "ERC20: approve from the zero address"); require(spender != address(0), "ERC20: approve to the zero address"); _allowances[owner][spender] = amount; emit Approval(owner, spender, amount); } /** * @dev Sets {decimals} to a value other than the default one of 18. * * WARNING: This function should only be called from the constructor. Most * applications that interact with token contracts will not expect * {decimals} to ever change, and may work incorrectly if it does. */ function _setupDecimals(uint8 decimals_) internal { _decimals = decimals_; } /** * @dev Hook that is called before any transfer of tokens. This includes * minting and burning. * * Calling conditions: * * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens * will be to transferred to `to`. * - when `from` is zero, `amount` tokens will be minted for `to`. * - when `to` is zero, `amount` of ``from``'s tokens will be burned. * - `from` and `to` are never both zero. * * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks]. */ function _beforeTokenTransfer( address from, address to, uint256 amount ) internal virtual {} } // import "https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/token/ERC20/SafeERC20.sol"; library Address { /** * @dev Returns true if `account` is a contract. * * [IMPORTANT] * ==== * It is unsafe to assume that an address for which this function returns * false is an externally-owned account (EOA) and not a contract. * * Among others, `isContract` will return false for the following * types of addresses: * * - an externally-owned account * - a contract in construction * - an address where a contract will be created * - an address where a contract lived, but was destroyed * ==== */ function isContract(address account) internal view returns (bool) { // This method relies on extcodesize, which returns 0 for contracts in // construction, since the code is only stored at the end of the // constructor execution. uint256 size; // solhint-disable-next-line no-inline-assembly assembly { size := extcodesize(account) } return size > 0; } /** * @dev Replacement for Solidity's `transfer`: sends `amount` wei to * `recipient`, forwarding all available gas and reverting on errors. * * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost * of certain opcodes, possibly making contracts go over the 2300 gas limit * imposed by `transfer`, making them unable to receive funds via * `transfer`. {sendValue} removes this limitation. * * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more]. * * IMPORTANT: because control is transferred to `recipient`, care must be * taken to not create reentrancy vulnerabilities. Consider using * {ReentrancyGuard} or the * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern]. */ function sendValue(address payable recipient, uint256 amount) internal { require( address(this).balance >= amount, "Address: insufficient balance" ); // solhint-disable-next-line avoid-low-level-calls, avoid-call-value (bool success, ) = recipient.call{value: amount}(""); require( success, "Address: unable to send value, recipient may have reverted" ); } /** * @dev Performs a Solidity function call using a low level `call`. A * plain`call` is an unsafe replacement for a function call: use this * function instead. * * If `target` reverts with a revert reason, it is bubbled up by this * function (like regular Solidity function calls). * * Returns the raw returned data. To convert to the expected return value, * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`]. * * Requirements: * * - `target` must be a contract. * - calling `target` with `data` must not revert. * * _Available since v3.1._ */ function functionCall(address target, bytes memory data) internal returns (bytes memory) { return functionCall(target, data, "Address: low-level call failed"); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with * `errorMessage` as a fallback revert reason when `target` reverts. * * _Available since v3.1._ */ function functionCall( address target, bytes memory data, string memory errorMessage ) internal returns (bytes memory) { return functionCallWithValue(target, data, 0, errorMessage); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but also transferring `value` wei to `target`. * * Requirements: * * - the calling contract must have an ETH balance of at least `value`. * - the called Solidity function must be `payable`. * * _Available since v3.1._ */ function functionCallWithValue( address target, bytes memory data, uint256 value ) internal returns (bytes memory) { return functionCallWithValue( target, data, value, "Address: low-level call with value failed" ); } /** * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but * with `errorMessage` as a fallback revert reason when `target` reverts. * * _Available since v3.1._ */ function functionCallWithValue( address target, bytes memory data, uint256 value, string memory errorMessage ) internal returns (bytes memory) { require( address(this).balance >= value, "Address: insufficient balance for call" ); require(isContract(target), "Address: call to non-contract"); // solhint-disable-next-line avoid-low-level-calls (bool success, bytes memory returndata) = target.call{value: value}(data); return _verifyCallResult(success, returndata, errorMessage); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but performing a static call. * * _Available since v3.3._ */ function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) { return functionStaticCall( target, data, "Address: low-level static call failed" ); } /** * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`], * but performing a static call. * * _Available since v3.3._ */ function functionStaticCall( address target, bytes memory data, string memory errorMessage ) internal view returns (bytes memory) { require(isContract(target), "Address: static call to non-contract"); // solhint-disable-next-line avoid-low-level-calls (bool success, bytes memory returndata) = target.staticcall(data); return _verifyCallResult(success, returndata, errorMessage); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but performing a delegate call. * * _Available since v3.3._ */ function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) { return functionDelegateCall( target, data, "Address: low-level delegate call failed" ); } /** * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`], * but performing a delegate call. * * _Available since v3.3._ */ function functionDelegateCall( address target, bytes memory data, string memory errorMessage ) internal returns (bytes memory) { require(isContract(target), "Address: delegate call to non-contract"); // solhint-disable-next-line avoid-low-level-calls (bool success, bytes memory returndata) = target.delegatecall(data); return _verifyCallResult(success, returndata, errorMessage); } function _verifyCallResult( bool success, bytes memory returndata, string memory errorMessage ) private pure returns (bytes memory) { if (success) { return returndata; } else { // Look for revert reason and bubble it up if present if (returndata.length > 0) { // The easiest way to bubble the revert reason is using memory via assembly // solhint-disable-next-line no-inline-assembly assembly { let returndata_size := mload(returndata) revert(add(32, returndata), returndata_size) } } else { revert(errorMessage); } } } } library SafeERC20 { using SafeMath for uint256; using Address for address; function safeTransfer( IERC20 token, address to, uint256 value ) internal { _callOptionalReturn( token, abi.encodeWithSelector(token.transfer.selector, to, value) ); } function safeTransferFrom( IERC20 token, address from, address to, uint256 value ) internal { _callOptionalReturn( token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value) ); } /** * @dev Deprecated. This function has issues similar to the ones found in * {IERC20-approve}, and its usage is discouraged. * * Whenever possible, use {safeIncreaseAllowance} and * {safeDecreaseAllowance} instead. */ function safeApprove( IERC20 token, address spender, uint256 value ) internal { // safeApprove should only be called when setting an initial allowance, // or when resetting it to zero. To increase and decrease it, use // 'safeIncreaseAllowance' and 'safeDecreaseAllowance' // solhint-disable-next-line max-line-length require( (value == 0) || (token.allowance(address(this), spender) == 0), "SafeERC20: approve from non-zero to non-zero allowance" ); _callOptionalReturn( token, abi.encodeWithSelector(token.approve.selector, spender, value) ); } function safeIncreaseAllowance( IERC20 token, address spender, uint256 value ) internal { uint256 newAllowance = token.allowance(address(this), spender).add(value); _callOptionalReturn( token, abi.encodeWithSelector( token.approve.selector, spender, newAllowance ) ); } function safeDecreaseAllowance( IERC20 token, address spender, uint256 value ) internal { uint256 newAllowance = token.allowance(address(this), spender).sub( value, "SafeERC20: decreased allowance below zero" ); _callOptionalReturn( token, abi.encodeWithSelector( token.approve.selector, spender, newAllowance ) ); } /** * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement * on the return value: the return value is optional (but if data is returned, it must not be false). * @param token The token targeted by the call. * @param data The call data (encoded using abi.encode or one of its variants). */ function _callOptionalReturn(IERC20 token, bytes memory data) private { // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that // the target address contains contract code and also asserts for success in the low-level call. bytes memory returndata = address(token).functionCall( data, "SafeERC20: low-level call failed" ); if (returndata.length > 0) { // Return data is optional // solhint-disable-next-line max-line-length require( abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed" ); } } } // import "https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/utils/EnumerableSet.sol"; library EnumerableSet { // To implement this library for multiple types with as little code // repetition as possible, we write it in terms of a generic Set type with // bytes32 values. // The Set implementation uses private functions, and user-facing // implementations (such as AddressSet) are just wrappers around the // underlying Set. // This means that we can only create new EnumerableSets for types that fit // in bytes32. struct Set { // Storage of set values bytes32[] _values; // Position of the value in the `values` array, plus 1 because index 0 // means a value is not in the set. mapping(bytes32 => uint256) _indexes; } /** * @dev Add a value to a set. O(1). * * Returns true if the value was added to the set, that is if it was not * already present. */ function _add(Set storage set, bytes32 value) private returns (bool) { if (!_contains(set, value)) { set._values.push(value); // The value is stored at length-1, but we add 1 to all indexes // and use 0 as a sentinel value set._indexes[value] = set._values.length; return true; } else { return false; } } /** * @dev Removes a value from a set. O(1). * * Returns true if the value was removed from the set, that is if it was * present. */ function _remove(Set storage set, bytes32 value) private returns (bool) { // We read and store the value's index to prevent multiple reads from the same storage slot uint256 valueIndex = set._indexes[value]; if (valueIndex != 0) { // Equivalent to contains(set, value) // To delete an element from the _values array in O(1), we swap the element to delete with the last one in // the array, and then remove the last element (sometimes called as 'swap and pop'). // This modifies the order of the array, as noted in {at}. uint256 toDeleteIndex = valueIndex - 1; uint256 lastIndex = set._values.length - 1; // When the value to delete is the last one, the swap operation is unnecessary. However, since this occurs // so rarely, we still do the swap anyway to avoid the gas cost of adding an 'if' statement. bytes32 lastvalue = set._values[lastIndex]; // Move the last value to the index where the value to delete is set._values[toDeleteIndex] = lastvalue; // Update the index for the moved value set._indexes[lastvalue] = toDeleteIndex + 1; // All indexes are 1-based // Delete the slot where the moved value was stored set._values.pop(); // Delete the index for the deleted slot delete set._indexes[value]; return true; } else { return false; } } /** * @dev Returns true if the value is in the set. O(1). */ function _contains(Set storage set, bytes32 value) private view returns (bool) { return set._indexes[value] != 0; } /** * @dev Returns the number of values on the set. O(1). */ function _length(Set storage set) private view returns (uint256) { return set._values.length; } /** * @dev Returns the value stored at position `index` in the set. O(1). * * Note that there are no guarantees on the ordering of values inside the * array, and it may change when more values are added or removed. * * Requirements: * * - `index` must be strictly less than {length}. */ function _at(Set storage set, uint256 index) private view returns (bytes32) { require( set._values.length > index, "EnumerableSet: index out of bounds" ); return set._values[index]; } // Bytes32Set struct Bytes32Set { Set _inner; } /** * @dev Add a value to a set. O(1). * * Returns true if the value was added to the set, that is if it was not * already present. */ function add(Bytes32Set storage set, bytes32 value) internal returns (bool) { return _add(set._inner, value); } /** * @dev Removes a value from a set. O(1). * * Returns true if the value was removed from the set, that is if it was * present. */ function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) { return _remove(set._inner, value); } /** * @dev Returns true if the value is in the set. O(1). */ function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) { return _contains(set._inner, value); } /** * @dev Returns the number of values in the set. O(1). */ function length(Bytes32Set storage set) internal view returns (uint256) { return _length(set._inner); } /** * @dev Returns the value stored at position `index` in the set. O(1). * * Note that there are no guarantees on the ordering of values inside the * array, and it may change when more values are added or removed. * * Requirements: * * - `index` must be strictly less than {length}. */ function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) { return _at(set._inner, index); } // AddressSet struct AddressSet { Set _inner; } /** * @dev Add a value to a set. O(1). * * Returns true if the value was added to the set, that is if it was not * already present. */ function add(AddressSet storage set, address value) internal returns (bool) { return _add(set._inner, bytes32(uint256(value))); } /** * @dev Removes a value from a set. O(1). * * Returns true if the value was removed from the set, that is if it was * present. */ function remove(AddressSet storage set, address value) internal returns (bool) { return _remove(set._inner, bytes32(uint256(value))); } /** * @dev Returns true if the value is in the set. O(1). */ function contains(AddressSet storage set, address value) internal view returns (bool) { return _contains(set._inner, bytes32(uint256(value))); } /** * @dev Returns the number of values in the set. O(1). */ function length(AddressSet storage set) internal view returns (uint256) { return _length(set._inner); } /** * @dev Returns the value stored at position `index` in the set. O(1). * * Note that there are no guarantees on the ordering of values inside the * array, and it may change when more values are added or removed. * * Requirements: * * - `index` must be strictly less than {length}. */ function at(AddressSet storage set, uint256 index) internal view returns (address) { return address(uint256(_at(set._inner, index))); } // UintSet struct UintSet { Set _inner; } /** * @dev Add a value to a set. O(1). * * Returns true if the value was added to the set, that is if it was not * already present. */ function add(UintSet storage set, uint256 value) internal returns (bool) { return _add(set._inner, bytes32(value)); } /** * @dev Removes a value from a set. O(1). * * Returns true if the value was removed from the set, that is if it was * present. */ function remove(UintSet storage set, uint256 value) internal returns (bool) { return _remove(set._inner, bytes32(value)); } /** * @dev Returns true if the value is in the set. O(1). */ function contains(UintSet storage set, uint256 value) internal view returns (bool) { return _contains(set._inner, bytes32(value)); } /** * @dev Returns the number of values on the set. O(1). */ function length(UintSet storage set) internal view returns (uint256) { return _length(set._inner); } /** * @dev Returns the value stored at position `index` in the set. O(1). * * Note that there are no guarantees on the ordering of values inside the * array, and it may change when more values are added or removed. * * Requirements: * * - `index` must be strictly less than {length}. */ function at(UintSet storage set, uint256 index) internal view returns (uint256) { return uint256(_at(set._inner, index)); } } // import "https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/access/Ownable.sol"; abstract contract Ownable is Context { address private _owner; event OwnershipTransferred( address indexed previousOwner, address indexed newOwner ); /** * @dev Initializes the contract setting the deployer as the initial owner. */ constructor() internal { address msgSender = _msgSender(); _owner = msgSender; emit OwnershipTransferred(address(0), msgSender); } /** * @dev Returns the address of the current owner. */ function owner() public view returns (address) { return _owner; } /** * @dev Throws if called by any account other than the owner. */ modifier onlyOwner() { require(_owner == _msgSender(), "Ownable: caller is not the owner"); _; } /** * @dev Leaves the contract without owner. It will not be possible to call * `onlyOwner` functions anymore. Can only be called by the current owner. * * NOTE: Renouncing ownership will leave the contract without an owner, * thereby removing any functionality that is only available to the owner. */ function renounceOwnership() public virtual onlyOwner { emit OwnershipTransferred(_owner, address(0)); _owner = address(0); } /** * @dev Transfers ownership of the contract to a new account (`newOwner`). * Can only be called by the current owner. */ function transferOwnership(address newOwner) public virtual onlyOwner { require( newOwner != address(0), "Ownable: new owner is the zero address" ); emit OwnershipTransferred(_owner, newOwner); _owner = newOwner; } } // "https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/utils/ReentrancyGuard.sol"; abstract contract ReentrancyGuard { // Booleans are more expensive than uint256 or any type that takes up a full // word because each write operation emits an extra SLOAD to first read the // slot's contents, replace the bits taken up by the boolean, and then write // back. This is the compiler's defense against contract upgrades and // pointer aliasing, and it cannot be disabled. // The values being non-zero value makes deployment a bit more expensive, // but in exchange the refund on every call to nonReentrant will be lower in // amount. Since refunds are capped to a percentage of the total // transaction's gas, it is best to keep them low in cases like this one, to // increase the likelihood of the full refund coming into effect. uint256 private constant _NOT_ENTERED = 1; uint256 private constant _ENTERED = 2; uint256 private _status; constructor() internal { _status = _NOT_ENTERED; } /** * @dev Prevents a contract from calling itself, directly or indirectly. * Calling a `nonReentrant` function from another `nonReentrant` * function is not supported. It is possible to prevent this from happening * by making the `nonReentrant` function external, and make it call a * `private` function that does the actual work. */ modifier nonReentrant() { // On the first call to nonReentrant, _notEntered will be true require(_status != _ENTERED, "ReentrancyGuard: reentrant call"); // Any calls to nonReentrant after this point will fail _status = _ENTERED; _; // By storing the original value once again, a refund is triggered (see // https://eips.ethereum.org/EIPS/eip-2200) _status = _NOT_ENTERED; } } // For interacting with our own strategy interface IStrategy { // Total want tokens managed by stratfegy function wantLockedTotal() external view returns (uint256); // Sum of all shares of users to wantLockedTotal function sharesTotal() external view returns (uint256); // Main want token compounding function function earn() external; // Transfer want tokens autoFarm -> strategy function deposit(address _userAddress, uint256 _wantAmt) external returns (uint256); // Transfer want tokens strategy -> autoFarm function withdraw(address _userAddress, uint256 _wantAmt) external returns (uint256); function inCaseTokensGetStuck( address _token, uint256 _amount, address _to ) external; } contract AutoFarmV2_CrossChain is Ownable, ReentrancyGuard { using SafeMath for uint256; using SafeERC20 for IERC20; // Info of each user. struct UserInfo { uint256 shares; // How many LP tokens the user has provided. } struct PoolInfo { IERC20 want; // Address of the want token. uint256 allocPoint; // How many allocation points assigned to this pool. AUTO to distribute per block. uint256 lastRewardBlock; // Last block number that AUTO distribution occurs. uint256 accAUTOPerShare; // Accumulated AUTO per share, times 1e12. See below. address strat; // Strategy address that will auto compound want tokens } PoolInfo[] public poolInfo; // Info of each pool. mapping(uint256 => mapping(address => UserInfo)) public userInfo; // Info of each user that stakes LP tokens. uint256 public totalAllocPoint = 1; // Total allocation points. Must be the sum of all allocation points in all pools. event Add( uint256 _allocPoint, IERC20 _want, bool _withUpdate, address _strat ); event Deposit(address indexed user, uint256 indexed pid, uint256 amount); event Withdraw(address indexed user, uint256 indexed pid, uint256 amount); function poolLength() external view returns (uint256) { return poolInfo.length; } // Add a new lp to the pool. Can only be called by the owner. // XXX DO NOT add the same LP token more than once. Rewards will be messed up if you do. (Only if want tokens are stored here.) function add( uint256 _allocPoint, IERC20 _want, bool _withUpdate, address _strat ) public onlyOwner { totalAllocPoint = totalAllocPoint.add(_allocPoint); poolInfo.push( PoolInfo({ want: _want, allocPoint: _allocPoint, lastRewardBlock: 0, accAUTOPerShare: 0, strat: _strat }) ); emit Add(_allocPoint, _want, _withUpdate, _strat); } // View function to see staked Want tokens on frontend. function stakedWantTokens(uint256 _pid, address _user) external view returns (uint256) { PoolInfo storage pool = poolInfo[_pid]; UserInfo storage user = userInfo[_pid][_user]; uint256 sharesTotal = IStrategy(pool.strat).sharesTotal(); uint256 wantLockedTotal = IStrategy(poolInfo[_pid].strat).wantLockedTotal(); if (sharesTotal == 0) { return 0; } return user.shares.mul(wantLockedTotal).div(sharesTotal); } // Want tokens moved from user -> AUTOFarm (AUTO allocation) -> Strat (compounding) function deposit(uint256 _pid, uint256 _wantAmt) public nonReentrant { PoolInfo storage pool = poolInfo[_pid]; UserInfo storage user = userInfo[_pid][msg.sender]; if (_wantAmt > 0) { pool.want.safeTransferFrom( address(msg.sender), address(this), _wantAmt ); pool.want.safeIncreaseAllowance(pool.strat, _wantAmt); uint256 sharesAdded = IStrategy(poolInfo[_pid].strat).deposit(msg.sender, _wantAmt); user.shares = user.shares.add(sharesAdded); } emit Deposit(msg.sender, _pid, _wantAmt); } // Withdraw LP tokens from MasterChef. function withdraw(uint256 _pid, uint256 _wantAmt) public nonReentrant { PoolInfo storage pool = poolInfo[_pid]; UserInfo storage user = userInfo[_pid][msg.sender]; uint256 wantLockedTotal = IStrategy(poolInfo[_pid].strat).wantLockedTotal(); uint256 sharesTotal = IStrategy(poolInfo[_pid].strat).sharesTotal(); require(user.shares > 0, "user.shares is 0"); require(sharesTotal > 0, "sharesTotal is 0"); // Withdraw want tokens uint256 amount = user.shares.mul(wantLockedTotal).div(sharesTotal); if (_wantAmt > amount) { _wantAmt = amount; } if (_wantAmt > 0) { uint256 sharesRemoved = IStrategy(poolInfo[_pid].strat).withdraw(msg.sender, _wantAmt); if (sharesRemoved > user.shares) { user.shares = 0; } else { user.shares = user.shares.sub(sharesRemoved); } uint256 wantBal = IERC20(pool.want).balanceOf(address(this)); if (wantBal < _wantAmt) { _wantAmt = wantBal; } pool.want.safeTransfer(address(msg.sender), _wantAmt); } emit Withdraw(msg.sender, _pid, _wantAmt); } function inCaseTokensGetStuck(address _token, uint256 _amount) public onlyOwner { IERC20(_token).safeTransfer(msg.sender, _amount); } }
Contract Security Audit
- No Contract Security Audit Submitted- Submit Audit Here
[{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"_allocPoint","type":"uint256"},{"indexed":false,"internalType":"contract IERC20","name":"_want","type":"address"},{"indexed":false,"internalType":"bool","name":"_withUpdate","type":"bool"},{"indexed":false,"internalType":"address","name":"_strat","type":"address"}],"name":"Add","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":true,"internalType":"uint256","name":"pid","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"Deposit","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":true,"internalType":"uint256","name":"pid","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"Withdraw","type":"event"},{"inputs":[{"internalType":"uint256","name":"_allocPoint","type":"uint256"},{"internalType":"contract IERC20","name":"_want","type":"address"},{"internalType":"bool","name":"_withUpdate","type":"bool"},{"internalType":"address","name":"_strat","type":"address"}],"name":"add","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_pid","type":"uint256"},{"internalType":"uint256","name":"_wantAmt","type":"uint256"}],"name":"deposit","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_token","type":"address"},{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"inCaseTokensGetStuck","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"}],"name":"poolInfo","outputs":[{"internalType":"contract IERC20","name":"want","type":"address"},{"internalType":"uint256","name":"allocPoint","type":"uint256"},{"internalType":"uint256","name":"lastRewardBlock","type":"uint256"},{"internalType":"uint256","name":"accAUTOPerShare","type":"uint256"},{"internalType":"address","name":"strat","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"poolLength","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_pid","type":"uint256"},{"internalType":"address","name":"_user","type":"address"}],"name":"stakedWantTokens","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalAllocPoint","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"},{"internalType":"address","name":"","type":"address"}],"name":"userInfo","outputs":[{"internalType":"uint256","name":"shares","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_pid","type":"uint256"},{"internalType":"uint256","name":"_wantAmt","type":"uint256"}],"name":"withdraw","outputs":[],"stateMutability":"nonpayable","type":"function"}]
Contract Creation Code
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
Deployed ByteCode Sourcemap
45132:5038:0:-:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;46430:95;;;:::i;:::-;;;;;;;;;;;;;;;;45845:26;;;;;;;;;;;;;;;;-1:-1:-1;45845:26:0;;:::i;:::-;;;;;-1:-1:-1;;;;;45845:26:0;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;45845:26:0;;;;;;;;;;;;;;;;;;;46015:34;;;:::i;48691:1298::-;;;;;;;;;;;;;;;;-1:-1:-1;48691:1298:0;;;;;;;:::i;:::-;;46735:526;;;;;;;;;;;;;;;;-1:-1:-1;46735:526:0;;;-1:-1:-1;;;;;46735:526:0;;;;;;;;;;;;;;;;;;;;;:::i;41768:148::-;;;:::i;47330:535::-;;;;;;;;;;;;;;;;-1:-1:-1;47330:535:0;;;;;;-1:-1:-1;;;;;47330:535:0;;:::i;41126:79::-;;;:::i;:::-;;;;-1:-1:-1;;;;;41126:79:0;;;;;;;;;;;;;;45900:64;;;;;;;;;;;;;;;;-1:-1:-1;45900:64:0;;;;;;-1:-1:-1;;;;;45900:64:0;;:::i;49997:170::-;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;49997:170:0;;;;;;;;:::i;47962:677::-;;;;;;;;;;;;;;;;-1:-1:-1;47962:677:0;;;;;;;:::i;42071:281::-;;;;;;;;;;;;;;;;-1:-1:-1;42071:281:0;-1:-1:-1;;;;;42071:281:0;;:::i;46430:95::-;46502:8;:15;46430:95;:::o;45845:26::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;45845:26:0;;;;-1:-1:-1;45845:26:0;;;;;;;;:::o;46015:34::-;;;;:::o;48691:1298::-;43353:1;43958:7;;:19;;43950:63;;;;;-1:-1:-1;;;43950:63:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;43353:1;44091:7;:18;;;;48772:21:::1;48796:8;48805:4;48796:14;;;;;;;;;::::0;;;::::1;::::0;;;48845;;;:8:::1;:14:::0;;;;;;48860:10:::1;48845:26:::0;;;;;;;;48933:8:::1;:14:::0;;48796::::1;::::0;;::::1;::::0;;::::1;::::0;-1:-1:-1;48845:26:0;48796:14;48854:4;;48933:14;::::1;;;;;;;;;;;;;;;:20;;;;;;;;;;-1:-1:-1::0;;;;;48933:20:0::1;-1:-1:-1::0;;;;;48923:47:0::1;;:49;;;;;;;;;;;;;;;;;;;;;;;;;;;::::0;::::1;;;;;;;;;;;;::::0;::::1;;;;;;;;;;;;;;;;;;;::::0;::::1;;-1:-1:-1::0;48923:49:0;49015:8:::1;:14:::0;;48923:49;;-1:-1:-1;48983:19:0::1;::::0;49024:4;;49015:14;::::1;;;;;;;;;;;;;;;:20;;;;;;;;;;-1:-1:-1::0;;;;;49015:20:0::1;-1:-1:-1::0;;;;;49005:43:0::1;;:45;;;;;;;;;;;;;;;;;;;;;;;;;;;::::0;::::1;;;;;;;;;;;;::::0;::::1;;;;;;;;;;;;;;;;;;;::::0;::::1;;-1:-1:-1::0;49005:45:0;49071:11;;49005:45;;-1:-1:-1;49063:44:0::1;;;::::0;;-1:-1:-1;;;49063:44:0;;::::1;;::::0;::::1;::::0;::::1;::::0;;;;-1:-1:-1;;;49063:44:0;;;;;;;;;;;;;::::1;;49140:1;49126:11;:15;49118:44;;;::::0;;-1:-1:-1;;;49118:44:0;;::::1;;::::0;::::1;::::0;::::1;::::0;;;;-1:-1:-1;;;49118:44:0;;;;;;;;;;;;;::::1;;49225:11:::0;;49208:14:::1;::::0;49225:49:::1;::::0;49262:11;;49225:32:::1;::::0;49241:15;49225::::1;:32::i;:::-;:36:::0;::::1;:49::i;:::-;49208:66;;49300:6;49289:8;:17;49285:67;;;49334:6;49323:17;;49285:67;49366:12:::0;;49362:568:::1;;49395:21;49446:8;49455:4;49446:14;;;;;;;;;::::0;;;::::1;::::0;;;:20:::1;:14;::::0;;::::1;;:20:::0;::::1;::::0;49436:62:::1;::::0;;-1:-1:-1;;;49436:62:0;;49477:10:::1;49436:62:::0;;::::1;::::0;;;;;;;;;;;-1:-1:-1;;;;;49446:20:0;;::::1;::::0;49436:40:::1;::::0;:62;;;;;49446:14;49436:62;;;;;;;;;49446:20;49436:62;::::1;;::::0;::::1;;;;::::0;::::1;;;;;;;;;;;;::::0;::::1;;;;;;;;;;;;;;;;;;;::::0;::::1;;-1:-1:-1::0;49436:62:0;49535:11;;49436:62;;-1:-1:-1;49519:27:0;::::1;49515:168;;;49581:1;49567:15:::0;;49515:168:::1;;;49637:11:::0;;:30:::1;::::0;49653:13;49637:15:::1;:30::i;:::-;49623:44:::0;;49515:168:::1;49724:9:::0;;49717:42:::1;::::0;;-1:-1:-1;;;49717:42:0;;49753:4:::1;49717:42;::::0;::::1;::::0;;;49699:15:::1;::::0;-1:-1:-1;;;;;49724:9:0::1;::::0;49717:27:::1;::::0;:42;;;;;::::1;::::0;;;;;;;;49724:9;49717:42;::::1;;::::0;::::1;;;;::::0;::::1;;;;;;;;;;;;::::0;::::1;;;;;;;;;;;;;;;;;;;::::0;::::1;;-1:-1:-1::0;49717:42:0;;-1:-1:-1;49778:18:0;;::::1;49774:77;;;49828:7;49817:18;;49774:77;49865:9:::0;;:53:::1;::::0;-1:-1:-1;;;;;49865:9:0::1;49896:10;49909:8:::0;49865:22:::1;:53::i;:::-;49362:568;;;49945:36;::::0;;;;;;;49966:4;;49954:10:::1;::::0;49945:36:::1;::::0;;;;::::1;::::0;;::::1;-1:-1:-1::0;;43309:1:0;44270:22;;-1:-1:-1;;;;;48691:1298:0:o;46735:526::-;41348:12;:10;:12::i;:::-;41338:6;;-1:-1:-1;;;;;41338:6:0;;;:22;;;41330:67;;;;;-1:-1:-1;;;41330:67:0;;;;;;;;;;;;;-1:-1:-1;;;;;;;;;;;41330:67:0;;;;;;;;;;;;;;;46906:15:::1;::::0;:32:::1;::::0;46926:11;46906:19:::1;:32::i;:::-;46888:15;:50:::0;46977:203:::1;::::0;;::::1;::::0;::::1;::::0;;-1:-1:-1;;;;;46977:203:0;;::::1;::::0;;;::::1;::::0;;::::1;::::0;;;-1:-1:-1;46977:203:0;;;;;;;;;;;;;;;::::1;::::0;;;;;;;46949:8:::1;:242:::0;;::::1;::::0;::::1;::::0;;;;;;::::1;::::0;;::::1;::::0;;::::1;::::0;;;;::::1;-1:-1:-1::0;;;;;;46949:242:0;;::::1;;::::0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;::::1;::::0;;;::::1;::::0;;;::::1;::::0;;;47209:44;;;;;;;::::1;::::0;;;;;::::1;;::::0;;;;;;;;;;;;;::::1;::::0;;;;;;;;::::1;46735:526:::0;;;;:::o;41768:148::-;41348:12;:10;:12::i;:::-;41338:6;;-1:-1:-1;;;;;41338:6:0;;;:22;;;41330:67;;;;;-1:-1:-1;;;41330:67:0;;;;;;;;;;;;;-1:-1:-1;;;;;;;;;;;41330:67:0;;;;;;;;;;;;;;;41875:1:::1;41859:6:::0;;41838:40:::1;::::0;-1:-1:-1;;;;;41859:6:0;;::::1;::::0;41838:40:::1;::::0;41875:1;;41838:40:::1;41906:1;41889:19:::0;;-1:-1:-1;;;;;;41889:19:0::1;::::0;;41768:148::o;47330:535::-;47435:7;47460:21;47484:8;47493:4;47484:14;;;;;;;;;;;;;;;;47533;;;:8;:14;;;;;;-1:-1:-1;;;;;47533:21:0;;;;;;;;;;;47599:10;47484:14;;;;;;;47599:10;;;;47589:35;;-1:-1:-1;;;47589:35:0;;;;47484:14;;-1:-1:-1;47533:21:0;;47484:14;47599:10;;;;;47589:33;;:35;;;;47484:14;;47589:35;;;;;;47599:10;47589:35;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;47589:35:0;47684:8;:14;;47589:35;;-1:-1:-1;47635:23:0;;47693:4;;47684:14;;;;;;;;;;;;;;;;:20;;;;;;;;;;-1:-1:-1;;;;;47684:20:0;-1:-1:-1;;;;;47674:47:0;;:49;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;47674:49:0;;-1:-1:-1;47738:16:0;47734:57;;47778:1;47771:8;;;;;;;;47734:57;47808:11;;:49;;47845:11;;47808:32;;47824:15;47808;:32::i;:49::-;47801:56;;;;;;47330:535;;;;;:::o;41126:79::-;41164:7;41191:6;-1:-1:-1;;;;;41191:6:0;41126:79;:::o;45900:64::-;;;;;;;;;;;;;;;;;;;;;;;;:::o;49997:170::-;41348:12;:10;:12::i;:::-;41338:6;;-1:-1:-1;;;;;41338:6:0;;;:22;;;41330:67;;;;;-1:-1:-1;;;41330:67:0;;;;;;;;;;;;;-1:-1:-1;;;;;;;;;;;41330:67:0;;;;;;;;;;;;;;;50111:48:::1;-1:-1:-1::0;;;;;50111:27:0;::::1;50139:10;50151:7:::0;50111:27:::1;:48::i;:::-;49997:170:::0;;:::o;47962:677::-;43353:1;43958:7;;:19;;43950:63;;;;;-1:-1:-1;;;43950:63:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;43353:1;44091:7;:18;;;;48042:21:::1;48066:8;48075:4;48066:14;;;;;;;;;::::0;;;::::1;::::0;;;48115;;;:8:::1;:14:::0;;;;;;48130:10:::1;48115:26:::0;;;;;;;48066:14:::1;::::0;;::::1;::::0;;::::1;::::0;-1:-1:-1;48158:12:0;;48154:425:::1;;48187:9:::0;;:138:::1;::::0;-1:-1:-1;;;;;48187:9:0::1;48240:10;48278:4;48302:8:::0;48187:26:::1;:138::i;:::-;48374:10;::::0;::::1;::::0;48342:9;;:53:::1;::::0;-1:-1:-1;;;;;48342:9:0;;::::1;::::0;48374:10:::1;48386:8:::0;48342:31:::1;:53::i;:::-;48410:19;48459:8;48468:4;48459:14;;;;;;;;;::::0;;;::::1;::::0;;;:20:::1;:14;::::0;;::::1;;:20:::0;::::1;::::0;48449:61:::1;::::0;;-1:-1:-1;;;48449:61:0;;48489:10:::1;48449:61:::0;;::::1;::::0;;;;;;;;;;;-1:-1:-1;;;;;48459:20:0;;::::1;::::0;48449:39:::1;::::0;:61;;;;;48459:14;48449:61;;;;;;;;;48459:20;48449:61;::::1;;::::0;::::1;;;;::::0;::::1;;;;;;;;;;;;::::0;::::1;;;;;;;;;;;;;;;;;;;::::0;::::1;;-1:-1:-1::0;48449:61:0;48539:11;;48449:61;;-1:-1:-1;48539:28:0::1;::::0;48449:61;48539:15:::1;:28::i;:::-;48525:42:::0;;-1:-1:-1;48154:425:0::1;48596:35;::::0;;;;;;;48616:4;;48604:10:::1;::::0;48596:35:::1;::::0;;;;::::1;::::0;;::::1;-1:-1:-1::0;;43309:1:0;44270:22;;-1:-1:-1;;47962:677:0:o;42071:281::-;41348:12;:10;:12::i;:::-;41338:6;;-1:-1:-1;;;;;41338:6:0;;;:22;;;41330:67;;;;;-1:-1:-1;;;41330:67:0;;;;;;;;;;;;;-1:-1:-1;;;;;;;;;;;41330:67:0;;;;;;;;;;;;;;;-1:-1:-1;;;;;42174:22:0;::::1;42152:110;;;;-1:-1:-1::0;;;42152:110:0::1;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;42299:6;::::0;;42278:38:::1;::::0;-1:-1:-1;;;;;42278:38:0;;::::1;::::0;42299:6;::::1;::::0;42278:38:::1;::::0;::::1;42327:6;:17:::0;;-1:-1:-1;;;;;;42327:17:0::1;-1:-1:-1::0;;;;;42327:17:0;;;::::1;::::0;;;::::1;::::0;;42071:281::o;2213:471::-;2271:7;2516:6;2512:47;;-1:-1:-1;2546:1:0;2539:8;;2512:47;2583:5;;;2587:1;2583;:5;:1;2607:5;;;;;:10;2599:56;;;;-1:-1:-1;;;2599:56:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;2675:1;2213:471;-1:-1:-1;;;2213:471:0:o;3160:132::-;3218:7;3245:39;3249:1;3252;3245:39;;;;;;;;;;;;;;;;;:3;:39::i;1289:136::-;1347:7;1374:43;1378:1;1381;1374:43;;;;;;;;;;;;;;;;;:3;:43::i;27259:248::-;27430:58;;;-1:-1:-1;;;;;27430:58:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;27430:58:0;-1:-1:-1;;;27430:58:0;;;27376:123;;27410:5;;27376:19;:123::i;:::-;27259:248;;;:::o;208:106::-;296:10;208:106;:::o;825:181::-;883:7;915:5;;;939:6;;;;931:46;;;;;-1:-1:-1;;;931:46:0;;;;;;;;;;;;;;;;;;;;;;;;;;;27515:285;27713:68;;;-1:-1:-1;;;;;27713:68:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;27713:68:0;-1:-1:-1;;;27713:68:0;;;27659:133;;27693:5;;27659:19;:133::i;:::-;27515:285;;;;:::o;28784:436::-;28915:20;28951:50;28995:5;28951;-1:-1:-1;;;;;28951:15:0;;28975:4;28982:7;28951:39;;;;;;;;;;;;;-1:-1:-1;;;;;28951:39:0;;;;;;-1:-1:-1;;;;;28951:39:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;28951:39:0;;:43;:50::i;:::-;29066:135;;;-1:-1:-1;;;;;29066:135:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;29066:135:0;-1:-1:-1;;;29066:135:0;;;28915:86;;-1:-1:-1;29012:200:0;;29046:5;;29012:19;:200::i;3788:312::-;3908:7;3943:12;3936:5;3928:28;;;;-1:-1:-1;;;3928:28:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;3967:9;3983:1;3979;:5;;;;;;;3788:312;-1:-1:-1;;;;;3788:312:0:o;1728:226::-;1848:7;1884:12;1876:6;;;;1868:29;;;;-1:-1:-1;;;1868:29:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;1920:5:0;;;1728:226::o;30149:885::-;30573:23;30612:118;30658:4;30612:118;;;;;;;;;;;;;;;;;30620:5;-1:-1:-1;;;;;30612:27:0;;;:118;;;;;:::i;:::-;30745:17;;30573:157;;-1:-1:-1;30745:21:0;30741:286;;30918:10;30907:30;;;;;;;;;;;;;;;-1:-1:-1;30907:30:0;30881:134;;;;-1:-1:-1;;;30881:134:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;22255:229;22392:12;22424:52;22446:6;22454:4;22460:1;22463:12;22424:21;:52::i;:::-;22417:59;22255:229;-1:-1:-1;;;;22255:229:0:o;23471:621::-;23641:12;23713:5;23688:21;:30;;23666:118;;;;-1:-1:-1;;;23666:118:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;23803:18;23814:6;23803:10;:18::i;:::-;23795:60;;;;;-1:-1:-1;;;23795:60:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;23929:12;23943:23;23983:6;-1:-1:-1;;;;;23983:11:0;24002:5;24009:4;23983:31;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;23983:31:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;23928:86;;;;24032:52;24050:7;24059:10;24071:12;24032:17;:52::i;:::-;24025:59;23471:621;-1:-1:-1;;;;;;;23471:621:0:o;19218:444::-;19598:20;19646:8;;;19218:444::o;26383:777::-;26533:12;26562:7;26558:595;;;-1:-1:-1;26593:10:0;26586:17;;26558:595;26707:17;;:21;26703:439;;26970:10;26964:17;27031:15;27018:10;27014:2;27010:19;27003:44;26918:148;27106:20;;-1:-1:-1;;;27106:20:0;;;;;;;;;;;;;;;;;27113:12;;27106:20;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
Swarm Source
ipfs://4ae99af6d7f9ea6339a5ee53abb7ca741ca2a600f36078c80738cf32ffd969fe
Age | Block | Fee Address | Jailed | Incoming |
---|